Pleated blind Grandekor BZ55A130, anthracite, 55 × 130 cm

Practical and modern pleated blind in anthracite color, suitable for windows of various sizes and helps to regulate the amount of sunlight in the room. Thanks to the pleated fabric, the blind takes up little space and fits into both modern and classic interiors.

The blind can be adjusted by moving it up or down, thus allowing you to cover exactly the necessary part of the window. It is especially suitable for situations when you need to preserve daylight, while ensuring greater privacy.

Assembly is provided without drilling, using the included fasteners for the window frame. This allows you to install the blind without damaging the window frame.

Key benefits:

* Modern anthracite design
* Space-saving pleated fabric
* Adjustable blind position
* Installation without drilling
* Easy to fit to the window frame
* Suitable for living rooms, bedrooms, kitchens, offices and other rooms
* Easy to combine with various interior styles

Model: BZ55A130
Article: 19665
Color: Anthrazit / anthracite
Size: 55 × 130 cm
Width: 55 cm
Height: 130 cm
Material: 100% polyester
Installation: without drilling, with window frame fasteners
Adjustment: blind adjustable up and down
Manufacturer: Grandekor
The set includes a pleated blind and the necessary fastening elements for its installation.

Assembly
1. Prepare 4 brackets
2. Place them on the window frame, Open the window. The upper brackets are placed on the upper edge of the window. The lower brackets are placed on the lower edge. The centerline of the blind should be in the middle of the window and should not cover the window handle.
3. Apply adhesive tape, stick it to the back of the brackets. Then press the brackets firmly to the window frame.
4. Insert the cords. The cords should be aligned so that the blind stands straight.
5. Tighten the cords. Pull the lower cords down so that they are sufficiently taut.
6. Adjust the tension of the cords. The cords should be taut, but not too tight.
7. Once everything is secured and adjusted, remove the tape holding the pleated blind.
8. Attach the handles. They are placed in the middle of the upper and lower parts of the blind. With them, the blind can be moved up and down.
9. Put on the decorative caps. They cover the fasteners and make the installation visually neat.

Important before purchasing
Before ordering, check the dimensions of the window and make sure that the 55 cm wide blind is suitable for your window. The possibility of installation also depends on the design of the window frame.